Magpul Tactical Gear Guide

TakTactical Buyer's Guide · Magpul

The Magpul Tactical Gear Guide: Stocks, Grips, PMAGs, Slings & the Rest

The complete reference for Magpul's lineup across AR-15, AK, Glock, and pistol platforms. In stock at TakTactical, ships in 1-2 business days from our US warehouse.

Why Magpul

Magpul is the only tactical accessory brand with a product line that touches almost every platform you'd actually shoot — AR-15, AR-10, AK-47/AK-74, Glock, SIG, 1911, Remington 870, and beyond. Founded by Marine Corps veterans in 1999, they built their reputation on the PMAG (which is now the de-facto standard 5.56 magazine in the US military) and expanded into stocks, grips, slings, sights, and beyond.

The brand's appeal is consistency: a Magpul MOE grip from 2010 fits a 2026 lower receiver. A PMAG 30 from any production run drops cleanly into any in-spec AR-15. They use the same polymer formulation, the same color-matching tolerances, and the same lifetime warranty across every product. If you can identify one thing as the "Magpul aesthetic," it's that everything matches.

This guide walks through every major Magpul product category we stock, with recommendations by use case (defensive, range, competition, restricted-state) and the specific SKUs that work for each platform.

Part 1: AR-15 Stocks

The stock is the single largest comfort upgrade on an AR-15. Factory stocks are designed to fit no one well — they're sized to be acceptable to everyone. A proper Magpul stock fits your length-of-pull, cheek weld, and recoil management within minutes of installation.

DT Carbine Stock (Workhorse)

The Magpul DT Carbine Stock (Mil-Spec, Black) is the entry into Magpul stocks. Six positions, integrated QD sling sockets on both sides, rubber buttpad for grip on body armor, and a snag-free profile. Fits any mil-spec carbine receiver extension. Sub-$50 price point. If you've never upgraded the factory stock on your AR, this is the place to start.

MOE SL Carbine Stock (Recommended)

The Magpul MOE SL Carbine Stock (Mil-Spec, Black) is the popular middle option. Improved internal frictioning so the stock doesn't rattle on the buffer tube, low-profile cheek weld designed for use with eye-relief-friendly optics, and dual M-LOK slots on the underside for attaching a hard cheek riser if needed. Our highest-volume stock with 1,177+ in stock.

If you want OD Green instead of black, the MOE SL-S Mil-Spec ODG is the OD-finished variant — useful for FDE/OD tactical builds where you want the stock to match the rest of the rifle.

Universal Carbine Stock

The Magpul Universal Carbine Stock (Black) — also in FDE and ODG — fits BOTH mil-spec AND commercial receiver extensions. Most AR-15s use mil-spec but some budget and older AR-15s use commercial. If you're not sure which your rifle has, buy the Universal — it works either way.

SL Stock for HK94/MP5

The Magpul SL Stock for HK94/MP5 (Black) is the specialized stock for HK roller-delayed platforms — HK94, MP5, SP5, and aftermarket clones. Cheekweld optimized for tube-style receivers, mounts to standard HK rear stock pin.

MOE SL Rubber Butt-Pad

If you want to add a softer recoil pad or extend length-of-pull on an existing Magpul SL stock, the MOE SL Rubber Butt-Pad (0.70") adds 0.7 inches of length and softens recoil meaningfully on .308 or 5.56 platforms.

Part 2: Pistol Grips (AR-15, AK, 1911, Glock RXM)

The grip is the cheapest upgrade with the highest comfort return — typically $20-25 and a five-minute install. Match the grip angle to your shooting style.

AR-15: MOE vs K2 vs K2+ Geometry

Magpul makes two main AR-15 grip profiles, each with multiple finishes:

• MOE AR Grip — classic A2-replacement angle (~14°), textured polymer, internal storage core. Best for traditional shooters who like the factory grip angle. Available in Black, FDE, and OD Green.
• MOE K2 AR Grip — steeper near-vertical angle (~10°), better for SBR or PCC builds where you're running a short stock and your wrist is naturally forward. The MOE K2 Black is the most-stocked grip in our entire store with 2,289+ units on hand.
• MOE K2+ AR Grip — same K2 geometry but with overmolded rubber wrap for grip in wet conditions or with gloves. MOE K2+ Black — 2,442+ in stock.

If you're between MOE and K2: try K2 first. The vertical angle works better for modern shooting stances (thumbs-forward, elbow down) and you'll see why most competition shooters use it.

AK-47/74 Grips

The factory AK pistol grip is the industry's most universally hated grip. It's thin, angles poorly for modern stances, and offers no texture. Two Magpul upgrades fix this:

• Magpul MOE AK 47 Grip (Black) — direct drop-in replacement for AK-47/74 lower. Same install bolt, takes five minutes.
• Magpul MOE SL AK Grip (FDE) — premium version with SL contour for a more aggressive shooting grip. FDE for coyote/desert tactical builds.

1911 Grip Panels

For 1911 owners, the Magpul MOE 1911 Grip Panels (TSP, Black) are direct-replacement grip panels with the aggressive TSP texture pattern. Replaces standard 1911 grip screws. Five-minute install.

Magpul EHG RG9 — For Glock RXM Frames

The Magpul Enhanced Handgun Grip (EHG) RG9 series fits the Magpul/Glock collaboration RXM frames. Two sizes:

• Magpul EHG RG9 Grip RXM Compact (Black) — for compact-size RXM frames (Glock 19-equivalent grip length).
• Magpul EHG RG9 Grip RXM Sub-Compact (Black) — for sub-compact RXM frames (Glock 26-equivalent grip length).

Part 3: PMAG — The Magazine That Built Magpul

The PMAG (Polymer Magazine) is what put Magpul on the map. The original PMAG launched in 2007 and within five years was the most-sold AR-15 magazine in the United States. Today the M3 (third generation) is the current production version — improved feed lip geometry, anti-tilt follower, and reinforced bolt-catch interface that survives bolt-drop on an empty mag without breaking.

5.56 / .223 AR-15 PMAGs

• Magpul PMAG GEN M3 5.56 30rd with Window (Black) — current generation, with the side window for round-count visibility. Our top-selling rifle magazine with 11,599+ in stock. Drop-free from any in-spec AR-15 lower.
• Magpul PMAG MOE 5.56 30rd with Window — previous generation MOE, still serviceable for range/training mags. Slightly cheaper than M3 if you're buying in bulk.
• Magpul PMAG 20 GEN M3 (5.56) — 20-round capacity for restricted states or for bench-rest precision work. 978+ in stock.

.300 Blackout PMAG

Running a .300 BLK upper? You need dedicated .300 magazines. The Magpul PMAG M3 .300 BLK 30rd (Black) has rib markings on the spine so you'll never confuse it with 5.56 in a mixed mag pouch. .300 BLK will physically chamber from a 5.56 magazine but feed angle is wrong and causes malfunctions.

AK PMAGs (7.62x39)

The Magpul PMAG 20 AK (7.62x39, 20rd, Black) is the 20-round AK option for restricted states or for prone shooting. Same polymer reliability as the AR PMAG family, AK-pattern follower and feed lips. 443+ in stock.

Glock PMAGs

Magpul makes drop-in magazines for Glock 9mm pistols too:

• Magpul PMAG for Glock 19 (10rd, Black) — 10-round restricted-state version. 6,017+ in stock.
• Magpul PMAG for Glock 26 (12rd, Black) — sub-compact magazine for G26.
• Magpul PMAG D-50 GL9 for Glock 17 (50rd) — 50-round drum magazine for full-size Glock 9mm. Range fun and PCC carbine application. 909+ in stock.

Precision Rifle / AICS PMAGs (.308)

For bolt-action precision rifles with AICS-pattern magwells (Bergara, Tikka T3X TAC, Ruger Precision Rifle, etc.):

• Magpul PMAG 5 AC 7.62x51 AICS (5rd, Black) — standard 5-round AICS pattern. 2,305+ in stock.
• Magpul PMAG 10 AC 7.62x51 AICS (10rd) — extended 10-round for precision rifle work. 2,040+ in stock.
• Magpul PMAG 5 AC L AICS Magnum (5rd, Black) — long-action AICS magazine for magnum chamberings (.300 Win Mag, .338 Lapua-shorter, etc.).

PMAG Accessories

• Magpul Ranger Plate for PMAG M2/MOE (3-pack, Black) — extended floorplate that makes mag extraction from a pouch easier. Universal fit for M2/MOE generation.
• Magpul PMAG GEN M3 Minus 5rd (7.62, 3-pack) — capacity-limiter inserts to convert 20-round 7.62 mags to 15-round (or similar) for restricted-state compliance.

Part 4: Slings & Sling Hardware

If you run a rifle longer than five minutes, you want a quality sling. Magpul makes three families, each with QD or fixed-loop options:

MS1 — The Standard

The Magpul MS1 Sling (2-Point Adjustable, Black) is the simplest, most reliable Magpul sling. Two-point design, adjustable from rifle-length to carbine-tight via a slider buckle, fixed loops at both ends. If you're new to slings, this is the right starting point. Available in Coyote for FDE/desert builds. 1,068+ in stock in black.

MS1 QDM — Quick-Detach Mountable

The Magpul MS1 QDM Sling (Black) uses QD push-button attachments at both ends — letting you remove the sling instantly without unthreading anything. Best for shooters who frequently transition between range and storage, or who clean their rifle weekly.

MS4 Dual QD — Two-Point or Single-Point

The Magpul MS4 Dual QD Gen 2 (Black) converts between 2-point and 1-point configurations in seconds. Useful for CQB-style training where a 1-point gives you maximum maneuverability, then back to 2-point for general use. Our highest-volume sling at 3,653+ in stock.

QD Attachment Hardware

• Magpul RSA QD Rail Sling Attachment — for any Picatinny rail. 2,315+ in stock.
• Magpul MS1 Single-Point QD Adapter (Black) — converts an MS1 from 2-point to 1-point at the receiver-end attachment.

Part 5: Backup Iron Sights — MBUS

Even on a red-dot rifle, backup iron sights (BUIS) are essential. Electronic optics fail; iron sights don't. Magpul's MBUS (Magpul Back-Up Sight) is the standard polymer flip-up BUIS — locks down flat on the rail when not needed, deploys with a thumb flick.

• Magpul MBUS Gen 2 Front Flip-Up Sight (OD Green) — picatinny front sight, A2-style protected post.
• Magpul MBUS Gen 2 Rear Flip-Up Sight (OD Green) — picatinny rear sight, dual-aperture (CQB + precision).

Pair the front and rear together — they're sold separately. Black versions are also typically available; check the product page for current colors.

Part 6: M-LOK Accessories & Bipod

Most modern AR-15s ship with M-LOK handguards (replacing older KeyMod and quad-rail systems). M-LOK lets you attach accessories at specific slots without permanent rail addition.

• Magpul Bipod (M-LOK, Black) — direct M-LOK-mount bipod. No QD interface needed. Spring-loaded legs, polymer construction, lighter than typical Harris-style bipods. 1,231+ in stock.
• Magpul AFG-2 M-LOK Adapter Rail (Black) — adapter to mount Picatinny-spec AFG-2 angled foregrip on M-LOK handguard.
• Magpul M-LOK Aluminum Rail Section (7 Slots) — adds a 7-slot picatinny section to M-LOK handguard. For mounting older picatinny-only accessories.
• Magpul M-LOK Rail Cover Type 1 (FDE) — covers unused M-LOK slots to protect against dirt and prevent skin contact with hot rails. FDE color for desert/tactical builds.

Part 7: Three Complete Magpul Builds

FAQ

Need a Recommendation?

The Magpul lineup is broad. If you're trying to figure out which grip fits your specific lower receiver, which PMAG capacity is legal in your state, or whether a particular stock will work with your buffer tube — contact us. We carry the full Magpul catalog and answer questions from real humans within hours.